Pro-grade, rack-mountable digital wireless in an easily expandable system.

The ATW-1312/L configuration includes the ATW-RC13 Rack-Mount receiver chassis, (2) ATW-RU13 Receiver units, ATW-T1002 Handheld dynamic unidirectional microphone/transmitter, and ATW-T1001 UniPak® body-pack transmitter with MT830cW Lavalier microphone.

System 10 PRO Rack-Mount

Providing the same interference-free operation in the 2.4GHz range (outside the TV bands) as the original System 10 wireless system, the System 10 PRO Rack-Mount system further expands upon the original’s features and versatility. Among those features is a durable half-rack chassis equipped to house 2 receiver units that can be operated locally -or- released from the chassis and mounted in a remote location (up to 328 feet away) via Ethernet cable. Up to 5 chassis (10 receiver units) can be linked using the RJ-12 cable included with each system, creating a stable, multichannel system with simultaneous use of up to 10 channels (additional chassis and receiver units sold separately).

Like all System 10 wireless products, the PRO Rack-Mount includes quality features like 24-bit operation, easy setup, clear and natural sound quality, and 3 levels of diversity assurance – Frequency, Time, and Space:

• Frequency Diversity sends the signal on 2 dynamically-allocated frequencies for interference-free communication
• Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference.
• Space Diversity uses 2 antennas on each transmitter and receiver unit to maximize signal integrity

Includes

• (1) ATW-RC13 rack-mount receiver chassis, with:
  • Power supply
  • AC adapter
  • Link cable
  • Rack-mount adapters
  • Joining plate
  • Rubber feet
• (2) ATW-RU13 receiver units, with:
  • Antennas
  • AT8690 RU13 holder
• (1) ATW-T1002 handheld dynamic unidirectional microphone/transmitter
• (1) ATW-T1001 UniPak® transmitter
• (1) MT830cW lavalier microphone
• Accessories Included: Windscreen, Clothing Clip

Features

• Digital 24-bit / 48kHz wireless operation for ultimate sound quality and dependable performance
• Operates in the 2.4GHz range – completely free from TV interference
• Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
• Up to five chassis (ten receiver units) can be linked and used simultaneously (additional units
• Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
• Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
• Automatic frequency selection for seamless, interference-free operation
• Extremely easy operation with instantaneous channel selection, sync, and setup
• Three levels of diversity assurance: frequency, time, and space
• Ground-lift switch helps eliminate audible hum caused by ground loops

Specifications

• Overall System:
  • Operating Frequencies: 2.4GHz ISM band
  • Dynamic Range: > 109dB (A-weighted), typical
  • Total Harmonic Distortion: < 0.05% typical
  • Operating Range: 200ft (60m) Open range env. with no interfering signals
  • Operating Temperature Range: 32°F -104°F (0°C – +40°C)
  • Frequency Response: 20Hz – 20kHz (Depending on microphone type)
• ATW-RC13 Receiver Chassis:
  • Maximum Output Level:
    • XLR, balanced: 0dBV
    • ¼” (6.3mm), unbalanced: +6dBV
  • Power Supply: 100 – 240VAC (50 / 60Hz) to 12VDC, 0.5A, power supply switched mode external
  • Dimensions (W x H x D): 8.26″ x 1.73″ x 6.67″ (209.8 x 44 x 169.3mm)
  • Net Weight: 33.2oz. (940g)
  • Remote receiver connector: RJ-45
• ATW-RU13 Receiver:
  • Receiving System: Diversity (frequency/time/space)
  • Remote Receiver Connector: RJ-45
  • Mounting Thread Insert: ¼” x 20
  • Dimensions (W x H x D): 2.24″ x 0.75″ x 3.06″ (57 x 19 x 77.6mm)
  • Net Weight: 2.3oz. (64g)
  • ATW-T1001 UniPak Body-pack Transmitter:
    • RF Power Output: 10mW
    • Spurious Emissions: Following federal and national regulations
    • Input Connection, cW-style 4-pin Locking Connector:
      • Pin 1: GND
      • Pin 2: INST INPUT
      • Pin 3: MIC INPUT
      • Pin 4: DC BIAS +9V
    • Batteries: (2) 1.5V AA (sold separately)
    • Battery Life: > 7 hours (alkaline) Depending on battery type and use pattern
    • Dimensions (W x H x D): 2.76″ x 4.21″ x 0.98″ (70.2 x 107.0 x 24.9mm)
    • Net Weight, without batteries: 3.5oz. (100g)
  • ATW-T1002 Handheld Mic/Transmitter:
    • RF Power Output: 10mW
    • Spurious Emissions: Following federal and national regulations
    • Batteries: (2) 1.5V AA (sold separately)
    • Battery Life: > 7 hours (alkaline) Battery
    • Dimensions (L x Dia): 10.03″ x 1.97″ (254.8 x 50.0mm)
    • Net Weight: 9.9oz. (280g) without batteries
  • MT830cW Lavalier Microphone:
    • Element: Fixed-charge back plate, permanently-polarized condenser
    • Polar Pattern: Omnidirectional
    • Frequency Response: 30Hz – 20kHz
    • Maximum Input Sound Level: 135dB SPL (sound pressure level), 1kHz @ Max SPL
    • Connector: Locking 4-pin connector for UniPak transmitter
    • Cable Length: 55″ (1.4m)