Audio Video Solutions Texas, Commercial and Residential

Crown DCi 4|1250DA 4-Channel Power Amplifier with Dante, 1250W at 4 Ohms, 70V/100V

$6,680.00

Available on backorder

Product Overview

More Crown products

Crown’s DCi 4|1250DA is a four-channel, 1250 W power amplifier with Dante™ networked audio, 2/4/8 Ω, and 70 V/100 V functionality. It’s a member of their DriveCore® Install DA lineup.

DriveCore Install DA Series

For installed audio amplification applications requiring Dante or AES67 networked audio support, Crown’s DriveCore® Install DA Series delivers a balanced combination of output power, channel count and speaker load flexibility as well as proprietary DriveCore technology—all offering exceptional efficiency and remarkable audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the capability to drive 2/4/8/16 Ω, plus 70 V and 100 V speaker loads. The unit’s advanced functionality, paired with support for Dante Domain Manager makes it an excellent choice for installations that settled on the Dante protocol for networked audio transport.

Features

  • Integrated Dante Networked Audio – Simplifies installation by enabling Dante networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers.
  • Network Configuration, Monitoring and Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
  • Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
  • Digital Signal Processing (DSP) includes:
    • LevelMAX Limiters
    • Input/Output EQ
    • Crossover
    • Delay
    • Matrix Router
    • Speaker Line Monitoring

Specifications

  • Output Channels: 4
  • Frequency Response (8Ω, 20Hz – 20kHz): ±0.25dB
  • Total Harmonic Distortion (at full rated power, 20Hz – 20kHz): 0.35%
  • Damping Factor (20Hz to 100Hz): >1500
  • Load Impedance (Stereo/Dual Mode): 2Ω – 16Ω; 70Vrms and 100Vrms
  • Load Impedance Bridge Mono: 4Ω – 16Ω; 140Vrms and 200Vrms
  • Cooling: Continuously variable speed forced air, front to back airflow
  • Maximum Fan Noise (re dBA SPL @ 1M): 47
  • Required AC Mains (±10%): 100V-240V ~ 50/60Hz
  • Power Connector: 20A IEC
  • Dimensions (W x H x D): 19 in x 3.5 in x 17 in (48.3 x 8.9 x 43.2 cm)
  • Weight: 13.60 kg (30 lbs)

Additional information

Weight 30 lbs
Dimensions 19.5 × 17.5 × 4 in